September 2008AutoSketch 10Create an Office Layout Drawing®
8 | Tutorial 3 — Create an Office Layout Drawing4 On the Scale tab, select the Architectural subtab (as shown in the follow-ing illustration). In the
Create Office Partition Walls | 9The drawing should now match the grid settings in the following illustration. Now that you have set the units, refere
10 | Tutorial 3 — Create an Office Layout Drawing4 On the edit bar, in the Width box, enter 0' 6". This sets the wall width to match the one
Add Doors and Windows | 11Add Doors and WindowsIn this exercise, you learn to❒ Choose symbols by using the Wizard Tools toolbar and the Content Librar
12 | Tutorial 3 — Create an Office Layout Drawing3 In the Content Librarian, locate Door 3-6 (a door that is 3 ft, 6 inches wide). 4 Click Door 3-6 an
Add Doors and Windows | 13Next, add a door to the interior office. 6 In the Content Librarian, click and hold Door 3-0, and drag it into the drawing.
14 | Tutorial 3 — Create an Office Layout DrawingTo add windows1 On the Wizard Tools toolbar, click and hold the Doors button.2 On the toolset, drag t
Add Doors and Windows | 155 With the symbol still active, click the top wall at the upper left to place the second window there, as shown in the follo
16 | Tutorial 3 — Create an Office Layout DrawingYou are ready to add the furniture to the office layout. Add FurnitureIn this exercise, you learn to❒
Add Furniture | 173 Click RPrivOffProSta and drag it into the interior office section of the drawing. Do not release the mouse button yet. 4 On the ke
© 2008 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, maynot be reproduced
18 | Tutorial 3 — Create an Office Layout DrawingCreate a Round Table and ChairsIn this exercise, you learn to❒ Create a round table using the All-In-
Create a Round Table and Chairs | 19Now, place five chairs around the round table. Instead of creating each chair individually, create one chair by ru
20 | Tutorial 3 — Create an Office Layout Drawing9 On the All-In-One toolbar, click and hold the Rubber Stamp button.10 On the toolset, drag the point
Create a Round Table and Chairs | 2112 In the drawing window, move the pointer over the edge of the table until the Centerpoint snap is displayed. The
1Tutorial 3 — Create an Office Layout DrawingIn this tutorial, you learn how to use the Office Layout wizard to set up a drawing. You also learn how t
2 | Tutorial 3 — Create an Office Layout DrawingStart a Drawing Using the Office Layout WizardIn this exercise, you learn to❒ Set up an office layout
Start a Drawing Using the Office Layout Wizard | 33 Do the following: In the row of office shell buttons, click the square shape (the first shape).
4 | Tutorial 3 — Create an Office Layout Drawing5 Clear all of the check boxes on this page. (You don’t need database reports in this tutorial.) Click
Start a Drawing Using the Office Layout Wizard | 57 Select Landscape from the list, and then click Next. On the next page of the wizard, you can selec
6 | Tutorial 3 — Create an Office Layout DrawingIn the AutoSketch window, the following drawing is displayed. 11 On the File menu, click Save. 12 In t
Set Units, Reference Grid, and Scale | 7Set Units, Reference Grid, and ScaleIn this exercise, you learn to❒ Right-click to access the Drawing Options
Comments to this Manuals